Little Free Library build-postscript

Hi Everyone,

Well the little library is done but done too late-it's gotten too cold to dig a hole and fill it with concrete and expect the concrete to solidify. So we can't place the post and the library in the ground this year. It will have to wait until next spring. The little library will be placed inside my home and wrapped up so the cats don't get to it. Humbug!

Anyway, it's time to close up shop for the winter. I'll be sweeping and dumping all of the unusable scrap wood I've collected and getting ready for the holidays.

I'm grateful to be back working in the wood shop and being able to do all the wood working stuff that I do. Next semester I'll be in the wood shop that is used by the cabinet making course I'm in and I'll tell you all about that as well as do other projects here on my own.

So my friends, have a wonderful rest of the year and a terrific New Year!

Best Always,
VW

Little Free Library build-it's finished!

Hi Everyone,

Well, here it is:

What a challenge this was-it's like building a house. There are a lot of little details (and aggravations) that went into it but it's very very strong, waterproof, and I think it could withstand a tidal wave. As I mentioned previously I live in a rugged climate with snow, lots of rain, and wind so the box had to be water tight and the finish had to be water proof and I think that's been accomplished.

The building of the box portion of the library was very straight forward and didn't really present any challenges other than running out of plywood at one point. The door however was a challenge. I built two frames and re-did the second frame and window twice before I got a door that would fit flush, keep out water and snow, look appealing from the street, and basically be destruction proof in case anyone thinks of vandalizing it. But I managed to prevail. The hinges were another difficulty as I couldn't find any hinges that were small enough to fit but strong enough to move the door multiple times without coming loose. Here's the hinges on the side of the box:

There is also a simple knob on the front and a hook and eye latch on the right hand side of the door to keep it closed.

The roof is similar to a regular roof on a house. I used construction adhesive and wood screws to attach it to the roof panels and I guess time will tell if it leaks. I don't think it will as there is a ton of adhesive underneath all of that roofing material.

The post and the framework

The post hole is going to be dug this weekend. The library itself is very heavy and so we need a very deep hole to support it, as well as a strong theft proof frame to hold the library onto the pole. And I'll let you know how that goes in a later posting.

Well, I'm glad I did it but I'm not too keen on doing another one anytime soon.

I will do a posting about the post and the frame and show you photos of it in place.

Stay tuned,
VW

Little Free Library build-nearing completion

Hi Everyone,

Well, here it is:

I still have to finish the door and put it on and there are a few odds and ends that need fixing. I think it's going to look really nice outside.

I'm going to screw and glue the Lexan pane on the door later this evening and screw it on tomorrow.

Stay tuned,
VW

Little Free Library Build-the roof, re-doing the door, and the exterior finish

Hello All,

Brrr, it's getting really cold outside and it's beginning to snow so my work time was brief today. Here's today's photos:

The roof:

Someone, I'm not sure who it was, donated some black roofing paper, several strips of roofing tiles, and a box of nails to the project. As I got on the last roof panel last night, it was time to put the roof on. Here's a photo of the paper in place. I held it in place with staples and spray adhesive to hold it still while I worked on it:

Here it is with the paper trimmed and in place:

I know this looks crooked but it really is straight and it' looks very nice against the brown stain:

The door

The door I made yesterday wound up not fitting the face frame-the frame inside for the Lexan panel didn't fit the inside space of the face frame so there was about a 1/2" gap between the door and the frame. So I had to make another one. It's down stairs with red paint on it and I'll install it tomorrow.

The exterior stain

I don't have a photo of the stain on the sides of the box. It's a medium brown, transparent deck stain and it looks really nice, especially with the red door next to it. I'll have to get photos of all this tomorrow afternoon.

In the mean time, I ran a screw into my left index finger so I'll need to tend to that and get some dinner.

Stay tuned,
VW

Little Free Library build-the door

Hi Again,

Well, the day I've been dreading has arrived-time to build the door.

The door in the plans is essentially a window with hinges, a knob, and a door clasp. I've never made a window before so I've had to improvise a lot and hope for the best. Here's the photos from today:

I debated whether to build an inset door or just to basically copy the face frame. I even consulted my  husband the engineer on this one and eventually I decided to go with a face frame type door. It is bigger and heavier that an inset door would be but I think it will keep out water better so face frame door it is:

And so that's what I did. Here is the completed door from the front:

The second part of the door is the window. I have a small Lexan sheet that I'm going to use. I built a frame work around the opening in the door and I plan to butt the edges of the Lexan window again the frame and glue and screw it in place:

This is what the underside of the door looks like:

And since red is the color of welcome, I've painted the door frame red. It will look nice against the natural wood color:

Next I will attach the face frame to the box with screws and glue and finish up any other work. Then it's time to apply a finish to the exterior of the box and the frame. I'll try and get to all of that this evening. Once this is done, all that remains is the roof and apply some exterior deck stain to the pole to preserve it. And then it's time to put it in the ground.

Stay tuned,
VW

Little Free Library Build-interior shelves and the face frame

Hello Again,

Another productive morning-I got the interior shelves installed and the face frame made. Here's some photos of this morning's work:

The paint dried and so it was time to install the shelving and this went very well. The unit is held in place with screws and it's very strong, strong enough to hold books and it also provides a means for strengthening the cabinet:

Now for the face frame-I'm using 1 x 4" lumber for this to make the frame and the box strong:

To get the proper dimensions, I temporarily installed the remaining roof pane.It over hangs the front of the box and the face frame has to be made to accommodate this:

 After measuring and cutting the parts, I assembled it with glue and Kreg screws. The joints are tight and strong:

And here it is turned over:

Here is the frame just laid on top of the front of the box. It fits perfectly:

I'm going to attach it with wood screws and wooden dowels as this will be visible from the front:

The next project involves making the door. Again, the slope of the roof as to be accommodated so the door will open.

And I'm going to use 1x4" pine for the frame. I'll also need to figure out how to attach the lexan window so it doesn't leak water:

Well, it's freezing cold right now and I'm going inside to defrost. I'll try and return this afternoon to make the door.

Stay tuned,
VW

Little Free Library build-painting and interior shelves

Hi Everyone,
Well, I'm off to a good start today. I've got some preliminary painting done and I've assembled the shelving unit. Here's some photos:

Here is the interior shelf unit. I assembled it with 2" long wood screws. This will provide some manner of organization for the books and help to keep them upright:

This is what it looks like:

My next task was to begin the finishing process. I had a container of exterior paint in "coconut" which I think is another way of saying off-white. I painted the inside and the shelves this color so it's not too dark inside:

Then I tipped the box over and applied a coat of exterior deck stain to the underside:

I'm also adding some moulding to give the box a more finished look:

And that's where I am right now. I'm going to let everything dry and give the painted surfaces another coat of paint later on this evening. And I'll begin the face frame.

Stay tuned,
VW